Please Note: The Remote Open and Close feature cannot function with multiple areas within your alarm system. The system has to be configured to fully arm/disarm to reliably change the relay state on the alarm panel. Please read the advice pages on WebWayWorld for more information. Wiring instructions and panel programming setup for Remote Set/Unset feature in CONXTD:

Texecom Premier Elite Range

Orisec CP-50

Honeywell Galaxy Dimension Series

Castle Euro 46

DSC PC Range

HKC SecureWave

Scantronic I-ON

Scantronic Menvier

Scantronic 9x5x

Supported by all Mk 6 WebWays (since Nov 2015) running SPT V2.0 and above.


Subscribing a new site to CONXTD If the WebWay and Panel are compatible a box will come up ‘Enable set/unset’. Tick this box and the feature will automatically be enabled for the Admin of the site. Add to an existing CONXTD site Go to CONXTD Subscription Manager and submit a request using the ‘Help’ button next to the site stating you want to enable Remote Set/Unset for the admin. Please Note: To be compatible with the CONXTD System, the panels exit timer should be no longer than 45 seconds. Any longer will reduce the likelihood of a successful arming of your alarm panel.




Knowledge Base

Panel Guides