Panel Programming

• Enable Installer Access - Default user code = 1111
• Press the Unlock Icon Key
• Enter user code
• Navigate to - INSTALLER MODE - and press - OK
• Enter Installer code
• 
  At the COMMUNICATIONS Menu press - OK
• Navigate to C.S. REPORTING and press - OK
• At 1st RPRT CHAN press - OK
• Select PSTN and press - OK
• Under 2nd RPRT CHAN press - OK
• Select DISABLED and press - OK
• Navigate to RCVR1 ACCOUNT and press - OK
• Enter account number (chipnumber) and press - OK
• Go to - PSTN/GSM RCV1 and press - OK
• Insert a telephone number (example: 01234567890) and press - OK
• Navigate to PSTN FORMAT press - OK
• Select SIA text and press - OK
• Press ESC
• 
  Navigate to UP/DOWNLOAD and press - OK
• Navigate to PSTN UP/DOWNLOAD press - OK
• Enable Remote Access
• Press ESC - and exit to make the changes take effect

WebWay Command Centre Settings (Internal Set-up)

• SPT Set-up
• Variable: PANEL_TYPE
• Value: VISONIC-PMASTER-MCM
• Desc: Used to instruct SPT which Panel manufacturer panel it will be connected to.
• 
  
• MCT/CC Profiles
• Panel type: VISONIC-PMASTER-MCM
• Desc: Configure SPT with the panel type to communicate with.

UDL information for this item can be found here: