Panel Programming

• Go to Menu 52 Digicom
• Select Comms Format
• Select ARC No <01234 567890>
• Select account no <_____> (Ignore accounts 2-8)
• Select dialing mode
• Select DigiCom options
• Select Restore signals
• Select FF Channels <8 FF Channels>

• Select Line fault

• Go to Menu 53 – RS232 Options
• Select RS232 option baud <38400>
• Select Remote modem
• Go to Menu 51
• Select Serial Number <_____> (Site/Chip ID)
• Select Account Name <_____> (Site/Chip ID)
• Select Access mode
• Select Edit call Nos
• Select Modem Options rings to answer
• Select Baud Rate <1200>
• Select Downloader – Modem Options – Ans Phone Defeat

Remote Access Programming

• Go to ‘set up downloading’
• Select download by (WebWayOne)
• Select poll timeout <10>
• Select modem init timeout <060>
• Select rings to answer <1>
• Select comm. Tx timeout <030>
• Select ARMPC telephone number (not required)
• Select program PCs <1>
• Select modem telephone number (not required)
• Select signal alarms (No)
• Select signal faults (No)
• Select signal set/unset (No)
• Select signal access code (No)
• Select password (optional UDL password)
• Select redials <03>

• Select time out <00>
• Select stop on success (No)
• Select dial mode (retry same)
• Exit engineering mode and save the configuration

UDL information for this item can be found here: