Panel Programming

• [Installer Mode] will be displayed
• Input 101, press (Enter)
• [101:Comms] will be displayed, press 1 (Single) & (Enter)
• Input 103, press (Enter)
• [103:Format] will be displayed, press 5 (Extended SIA 3) & (Enter)
• Input 112, press (Enter)
• [112:Rings To Ans] will be displayed, press 0 (Any) & (Enter)
• Input 114, press (Enter)
• [114:CallBack] will be displayed, press 2 (Any) & (Enter)
• [115:Tel No 1] will be displayed, press (Enter) and input telephone number<01234 567890> & (Enter)
• Input 117, press (Enter)
• [117:AccountNo] will be displayed, press (Enter) and input account number and press (Enter)
• Input 131, press (Enter)
• [131:Mode] will be displayed, press 3 (Full) & (Enter)
• Input 89, press (Enter)
• [89:Confirm] will be displayed, press 0 (Off) & (Enter)
• Select test calls (No)
• 
  Exit Engineer Mode into Day Mode

Remote Access Programming

• Go to ‘set up downloading’
• Select download by (WebWayOne)
• Select poll timeout <10>
• Select modem init timeout <060>
• Select rings to answer <1>
• Select comm. Tx timeout <030>
• Select ARMPC telephone number (not required)
• Select program PCs <1>
• Select modem telephone number (not required)
• Select signal alarms (No)
• Select signal faults (No)
• Select signal set/unset (No)
• Select signal access code (No)
• Select password (optional UDL password)
• Select redials <03>

• Select time out <00>
• Select stop on success (No)
• Select dial mode (retry same)
• Exit engineering mode and save the configuration

UDL information for this item can be found here: