Panel Programming

• Panel Login
• 1. (Menu>)= X key
• 2. (Enter) = Tick key
• 3. Default Keypad User code = 1234 (Menu)
• 4. [0 Installer Programming] will be displayed, press (Enter)

• 5. [00 Program System] will be displayed, input 71

• 6. [71 Communication options] will be displayed, press (Enter)
• 7. [Dial Type] will be displayed, set to ‘DTMF’ and press (Enter)
• 8. [Call Mode] will be displayed, set to ‘Single’ and press (Enter)
• 9. [3 Way Call] will be displayed, set to ‘Disabled’ and press (Enter)
• 10. [Dynamic Test] will be displayed, set to ‘Disabled’ and press (Enter)
• 11. [Static Test] will be displayed, set to ‘Disabled’ and press (Enter)
• 12. [Line Integrity] will be displayed, set to ‘Disabled’ and press (Enter)
• 13. [Line Monitor] will be displayed, set to ‘Enabled’ and press (Enter)
• 14. [Report Restorals] will be displayed, set to ‘Enabled’ and press (Enter)
• 15. [Log with Partns] will be displayed, set to ‘Enabled’ and press (Enter)
• 16. [Format] will be displayed, set to ‘Extended SIA 3’ and press (Enter)
• 17. [SIA Tone Format] will be displayed, set to ‘Bell 103’ and press (Enter)
• 18. [Report Mode] will be displayed, set to ‘Full’ and press (Enter)
• 19. [TA->BA] will be displayed, set to ‘Enabled’ and press (Enter)

• 20. [Acknowledge] will be displayed, set to ‘Tonal’ and press (Enter)

• 21. [71 Communication options] will be displayed, input 72
• 22. [72 Program Phone Numbers] will be displayed, press (Enter)
• 23. [T01:Number=] will be displayed, press (Enter)
• 24. Input a random telephone number, press (Enter)
• 25. Note: number must NOT be ‘123456’
• 26. [T01:Account No] will be displayed, press (Enter)
• 27. Input account or site id, press (Enter) twice

• Panel Setting for UDL:

• The panels call-back feature requires enabling for successful UDL communications.

• After engineer login.

• [0 Installer Programming] will be displayed, press (Enter)
• [00 Program System] will be displayed, input 73
• [73 Downloader Options] will be displayed, press (Enter)
• [Account Name] will be displayed
• Input account name, press (Enter). Note: The account name must match what is stored in the UDL application
• [Rings to Answer] will be displayed, Input 1, press (Enter)
• [Answer on 1 Ring] will be displayed, set to ‘Disabled’, press (Enter)
• [Secure Callback] will be displayed, set to ‘Enabled’, press (Enter)
• [T01:Download No] will be displayed, press (Enter)
• Input ‘123456’, press and then press (Menu)

Remote Access Programming

• Go to ‘set up downloading’
• Select download by (WebWayOne)
• Select poll timeout <10>
• Select modem init timeout <060>
• Select rings to answer <1>
• Select comm. Tx timeout <030>
• Select ARMPC telephone number (not required)
• Select program PCs <1>
• Select modem telephone number (not required)
• Select signal alarms (No)
• Select signal faults (No)
• Select signal set/unset (No)
• Select signal access code (No)
• Select password (optional UDL password)
• Select redials <03>

• Select time out <00>
• Select stop on success (No)
• Select dial mode (retry same)
• Exit engineering mode and save the configuration

UDL information for this item can be found here: