Panel Programming V1 & V2

• Enter Engineer Mode
• Make sure that SP1 on the HKC panel is set up for Remote PC.
• Comms Menu
• Comms Opts Menu
• SP1 Port Options
• Set "Remote Access" to
• Next
• Set "Secure Access"
• Next
• Set "Local Access"
• Next
• Set "Printer Port"
• Make sure that SP1 baud is set 2400
• Data bits 8
• Stop bit 1
• NO PARITY. (default)
• "Comms Menu"
• "Com Service Menu"
• "Port Settings"
• "Com Service Menu"
• To change remote user code from default
• Select Comms Menu
• Select Remote User Menu
• Then select remote user code
• RO1 Remote user will be displayed, set and verify this as 1234 or as required.
• Notify WebWayOne of the new code, or set this using mrk 5- menue H mrk 6 - menue k on the WebWay Communicator

Troubleshooting

UDL information for this item can be found here: