Modem Capture Connectivity PC1616/ PC1832/PC1864 Configuration

• Connect the WebWay PSTN panel interface A and to the A and B terminals of the DSC control panel. Connect the WebWay PWR + and - to the Aux + and Aux - of the DSC control panel.
• *8 Then enter installers code
• 1. Go to section 301: Enter telephone number <01234 567890> (any valid phone number is acceptable)
• 2. Go to section 310: Enter account number
• 3. Go to section 350: Enter communicator format to SIA <04>
• 4. Go to section 380: Ensure option 1 is enabled to <1________>
• 5. Go to section 381: Ensure options 5 & 6 are enabled - the rest clear <____56__>
• 6. Go to section 382: All must be clear <_________>
• 7. Go to section 401: Option 1 must be set - the rest clear<1________>
• 8. Go to section 403: Enter DLS access code <______>
• 9. Go to section 404: Enter DLS panel identification code <______>
• 10. Go to section 406: Set number of rings to <002>
• Select content 17-32 (recommend 21-25, 27-30, & 32)
• Select redials <03>
• Select time out <15>
• Select test calls (No)

Remote Access Programming

• Go to set up downloading۪
• Select download by
• Select security mode
• 4. Select telecom line
• Select number of rings <3>
• Select modem speed
• Select ARMPC telephone number <123456>
• Select program PCs <1>
• Select modem telephone number (not required)
• Select signal alarms (No)
• Select signal faults (No)
• Select signal set/unset (No)
• Select signal access code (No)
• Select password (optional UDL password)
• Select redials <03>

• Select time out <00>
• Select stop on success (No)
• Select dial mode (retry same)
• Exit engineering mode and save the configuration
• Go to Site Options
• Select ATE inputs

UDL information for this item can be found here: