Panel Programing

• Go to Engineering Mode
• Go to Program ARC/SMS?s
• Press (YES)
• Display Shows: ARC/SMS is Dispable
• Select <0>
• Press (YES)
• Display Shows: Active - Yes [1]
• Press (yes)
• Display Shows: Active - Yes [1]
• Press (YES)
• Select 9Option 129
• Press (YES)
• Display Shows: 1st ARC/SMSC
• Enter <01666111>
• Press (YES)
• Display Shows: Second No
• Enter <01666222>
• Press (YES)
• Select Valid areas (A,B,C,D) (to suit your Installation)
• Press (YES)
• Display Shows: Area Accounts/ (NO)
• Press (YES)
• Select ARC account <****> (this is the ARC Account Number/Chip No)
• Press (YES)
• Select content 1-16 (Trigger events) (recommend 1-5 & 7-13)
• Press (YES)
• Select content 17-32 (trigger events) (recommend 21-25, 27-30 & 32)
• Press (YES)
• Select redials <03>
• Press (YES)
• Select redials <03>
• Press
• Select test calls (NO)

Remote Access Programming

• • Go to ‘set up downloading’
• • Select download by (WebWayOne)
• • Select poll timeout <10>
• • Select modem init timeout <060>
• • Select rings to answer <1>
• • Select comm. Tx timeout <030>
• • Select ARMPC telephone number (not required)
• • Select program PCs <1>
• • Select signal alarms (No)
• • Select signal faults (No)
• • Select signal set/unset (No)
• • Select signal access code (No)
• • Select password (optional UDL password)
• • Select redials <03>
• • Select time out <00>
• • Select stop on success (No)
• • Select dial mode (retry same)
• • Exit engineering mode and save the configuration

UDL information for this item can be found here: