Connections can be made from the WebWay serial connections direct into the port 2 screw terminals on the Europlex 3GS panel:

WebWay     Alarm Panel
232 R  >    TX2
232 T  >    RX2
RTN  >    0V

Connect the WebWay PWR + and - to any relevant Power (12V/24V) and Ground (0V) terminals.



Once in Engineer mode navigate to Data Format

Set the Port 2 rate to:     Port 2    19200    E,8,1

There is no line fault indication through the panel bus to the keypad so the SPT outputs for line fault will be required.